Lead Ingot Continuous Casting Unit
Our ZQ unit coordinates mold filling, cooling, demolding, conveying and stacking for lead remelt or alloy ingots. It reduces repeated manual handling of hot ingots, with molds, cooling and collection configured for your product and plant.
Key Features
• Controlled cooling and crystallization support repeatable ingot formation.
• Continuous mold movement coordinates casting, cooling and demolding.
• Mechanical handling reduces repeated contact with hot ingots.
• Hydraulic drive permits casting-speed adjustment for the approved mold duty.
• Mold quantity, conveying and stacking can be configured for the agreed product and layout.
Equipment Composition
The lead ingot continuous casting unit is mainly composed of:
• Casting machine body
• Molten lead distribution system
• Continuous casting mold system
• Cooling system
• Hydraulic transmission system
• Automatic demolding device
• Conveyor and stacking system
• Electrical control system
Technical Parameters
| Model | Casting Capacity (t/h) | Ingot Weight (kg) | Number of Molds | Casting Speed | Drive Type | Total Power (kW) |
|---|---|---|---|---|---|---|
| ZQ-3200 | 3–5 | 20–45 | Customized | Adjustable | Hydraulic | 35 |
| ZQ-5200 | 5–8 | 20–45 | Customized | Adjustable | Hydraulic | 45 |
What Determines Ingot-Line Output
Ingot geometry, target weight and alloy composition determine the molds and handling arrangement. Mold quantity, cooling time, release condition and the collection or stacking cycle then set the practical output. Coordinating these stages also gives the operator a clear view of the production sequence.
The listed models provide a reference range. We confirm the duty against the actual ingot drawing and melt conditions, with ventilation and fume collection defined alongside the equipment and site responsibilities.
Suitable Melt
Molten primary, recycled or alloy lead with composition, temperature and preparation controlled for the required ingot.
Typical Applications
Remelt and alloy ingot production in lead smelting, recycling and alloy-preparation plants.
Planning a Lead Ingot Casting Unit
Tell us the lead or alloy ingot you want to produce and where the unit will be installed. Share a target weight or output if available. For the technical proposal, we confirm composition, melt temperature, ingot geometry, cooling and conveying or stacking, together with ventilation, fume collection, space, utilities and operator responsibilities.
From Ingot Drawing to Technical Proposal
In our proposal, we define the reference model, molds, cooling, demolding, conveying, stacking and environmental interfaces. We confirm final output for the approved ingot and site basis.
Compare lead ingot, strip and anode duties in the Lead Processing Lines guide.
Learn about our manufacturing and project support, or browse our latest Projects & Insights.